DIMLED Dimming Module for LEDs, LEDBARs, Luxeon etc.

Technical Data according to datasheet:
Operating Voltage: min. 5 V up to 30 Volt DC max.
Input: protected against confusion of the poles
up to max. 40 Volt
Output current: up to 1800 mA
Dimming range: 0 to 100 % in 256 digital steps
Drop: only a few millivolts depending on load
Switching: Jumper for inverting (for KONLUX, HKO
and similar circuits)
Output PWM: For controlling of external modules and
circuits with TTL-level, MS-Module etc.
Connection: Connecting-terminals with
wire-protection (use simple screwdriver).
Blue terminal = Input from power-source(+ and ? are marked)
Black terminal = Connections for LED-circuit (marked with PWM and
LED -)
PWM = Output for the connection of additional modules (red dot)
- for the connecting to the minus pole of LEDBARs etc.
Dimensions: 20 mm (W) x 38 mm (L) x 25 mm (H) (without potentiometer)
Axis: 4 mm diameter
Drilling: 6 mm diameter for the potentiometer
The axis can be shortened to fit any purposes.
Weight: appr. 12 Gramms
A detailed manual containig connection examples will be delivered with the module.
The module is connected to switch the minus-pole of the LEDs or LED-circuits against ground.
When controlling TTL-compatible circuits, for example Konlux/HKO it is necessary to connect the jumper (included) for inverting the output signal.
Connection examples for DIMLED
Do not use with 220V Luxeon Drivers or AC constant-current sources.